Imetec M3002 Instrucciones De Uso página 8

Refer to page I of the Illustrative Guide to check the contents of the package.
All the figures are found on the inside pages of the cover.
1. front grid
2. Intake filter
3. Handle joint
4. Handle
The hair dryer is provided with the accessories described above. The accessory is mounted on the appliance by pressing
it onto the front grid (1) of the hair dryer until it is inserted. When finished using it, the accessory can be removed by pulling
it firmly.
Styling nozzle (9)
Use the styling nozzle to direct the air jet as you wish.
IMPORTANT: use only the original accessories of the appliance.
The appliance has various control and function buttons, depending on the model. Refer to figure [A] in the illustrative guide
of the instructions for use.
Appliance with combined air flow and temperature button (7)
The combined air flow and temperature button allows setting the air flow and temperature at the following levels:
0 = Off
1 = high air flow and low temperature
2 = high air flow and medium temperature
3 = high air flow and high temperature
Cold air shot button (8)
If the appliance is equipped with this button, it can be used to set the styling.
• If this button is pressed while the appliance is on, the hot air cools down and the set style lasts longer.
• Once the button is released, the appliance returns to a hot air flow at the selected level.
IMPORTANT! Using the appliance with an incorrect voltage setting, which does not correspond
with that of the mains, can result in overheating and damage the hair dryer.
• Thanks to the joint (3), the handle of the hair dryer can be bent to save space while travelling.
When the hair dryer is not used, unplug the appliance from the socket and store it in a dry and dust-free place.
Do not wind the power cord around the appliance. Coil it up loosely without bending it.
IMPORTANT! Switch the appliance off and unplug it from the socket before cleaning!
Make sure all cleaned parts are completely dry before reusing the appliance!
Cleaning the appliance and accessories
Clean the appliance and the accessories (diffuser, nozzle) with a damp cloth when needed. Do not use solvents or other
aggressive or abrasive detergents. Otherwise, the surface could be damaged.
Check the intake opening of the appliance regularly and remove all hair and dust.
Note: the more dust is present in the place where the hair dryer is used, the more often the filter must be cleaned.
The product is packaged in recyclable materials. Dispose of it in compliance with the environmental protection standards.
Pursuant to Art. 26 of Italian Legislative Decree no. 49 of 14 March 2014 "Implementation of Directive 2012/19/EU on
waste electrical and electronic equipment (WEEE)" the crossed bin symbol on the appliance or its packaging indicates
that the product must be disposed of separately from other waste at the end of its useful life. The user must therefore take
the appliance to an appropriate recycling centre for electrical and electronic equipment. Alternatively, instead of handling
the disposal, the appliance can be handed over to the retailer when a new, equivalent appliance is purchased. Retailers
of electronic products having a sales area of at least 400 m2 can also be handed electronic products that are to be
disposed of measuring less than 25 cm, free of charge and with no obligation to buy. Appropriate separate collection for the
subsequent procedure for the decommissioned appliance for recycling, which includes treatment and environmentally friendly
disposal helps prevent adverse effects on the environment and health and promotes reusing and/or recycling materials that the
appliance consists.
5. Technical Data
6. Attachment eyelet
7. Air flow/termperature seleciton
button
USE OF ACCESSORIES
USE
STORAGE
MAINTENANCE
CLEANING
DISPOSAL
6
8. Cold air shot
9. Styling nozzle