Navigation Operation Without Map Software - Multilaser P3174 Manual Del Usuario

• MENU
Pressing " MENU" , you can see INFORMATION Menu of
EPG, Setting, System Information, Scan. You can control menu
by using "UP/DOWN" or "LEFT/RIGHT" button and by pressing
"OK" button.
. Language Setting: [MENU] -> [SETTING] -> [LANGUAGE] ->
Select [English] or [Portuguese].
. Mode: [MENU] -> [SETTING] -> [MODE] -> [NTSC] or [AL-M]
. Mode: [MENU] -> [SETTING] -> [BRIGHTNESS]
. Reset: [MENU] -> [SETTING] -> [RESET], restore the factory
setting.
. System Information: [MENU] -> [SYSTEM INFORMATION],
you can see its H/W and S/W versions.
. Scan: [MENU] -> [Scan], you can see Scan menu.You can
select Full scan and Frequency Selection.
. -EXIT: On pressing [EXIT], it shall return to the previous
Menu.
• Conversion of the channels
It will take longer time than Analog TV channel conversion.

11. NAVIGATION OPERATION WITHOUT MAP SOFTWARE

1. Press MENU button and touch the icon
2. If click the icon, the middle window will display setup
function icon , include navigate setup, usual setup, GPS
monitor, touch screen adjust, screen adjust, time setup, skin
setup, system message. Please see picture.
Manual do usuário . Manual del usuario
to select navigation mode . In the left upright bar
35
, is Setup function.