3. Insert the battery holder into the remote controller.
14. INSTALL THE UNIT (DIN FRONT MOUNT)
INSTALLATION INSTRUCTIONS
Notes:
. Choose the mounting location where the unit
will not interfere with the normal driving function
of the driver.
. Before finally installing the unit, connect
the wiring and make sure that the unit works
properly.
. Consult with your nearest dealer if installation
requires the drilling of holes or other modifica-
tions of the vehicle.
. Install the unit where it does not get in the
driver's way and cannot injure the passenger if
there is a sudden stop, like an emergency stop.
• Remove the front panel
• Install the front panel
The Detached part install back into the unit the installation direction should
be from down to up.
Please refer to the left of the test images.
NOTE: The play with continue from the point it stopped in the media
last time.
Manual do usuário . Manual del usuario
Press "REL" button, This part plastic will be detached.
Please refer to the left of the test images.
NOTE: With the panel removed, the system will stop
all work, inorder to operated this system re-install
the parel.
45