Jackery Explorer 2000 Pro Manual Del Usuario página 7

GB
LCD Screen On/Off
To Turn On, press the DISPLAY Button, any Output Power Button, or LED Light Button. Or, when there's a
charging input, the screen display will light up automatically.
To Turn Off, press the DISPLAY Button again and the screen display will turn off. Or, if there is no
operation in 30 seconds, the product will enter a sleep state and the screen display will automatically
turn off.
To get the screen always-on (under charging or discharging state), follow these steps : After the
display screen lights up, double-click the DISPLAY Button and the mode of Always-On Display will be on.
To turn off Always-On Display, follow these steps : Press the DISPLAY Button and the screen will be
turned off in 30 seconds.
Tip : During Always-On mode, the screen automatically turns off after 2 hours without charging or
discharging.
LED Light On/Off
There are three modes of LED Light: Low Light mode, Bright Light mode, and SOS mode.
The operations are as follows: Press the LED Light Button, the LED will be turned on. The light will
always turn on in Low Light mode and the output power on the screen is 1W. Press again to enter the
Bright Light mode and the output power on the screen is 3W. Press the third time to enter the SOS
mode and the output power on the screen is 3W. Then, press again to turn off the LED Light. In any of
these modes, the light can be turned off by a long press.
05
Car Port Button
AC Button
USB Button