One-Touch Timer Recording (Otr); Setting The Timer Recording - memorex MVR2040A Serie Manual De Instrucciones

ONE-TOUCH TIMER
RECORDING ( OTR )
The One-touch Timer Recording feature provides
a simple and convenient way to make a timed
recording.
EXAMPLE: One-touch Timer Recording for 30 minutes.
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the video channel 3 or 4.
• Turn on the VCR POWER button.
When a TV is connected with an audio/video cable, turn
the TV on and select the video input mode on the TV.
1
Load a cassette tape with the
erase prevention tab intact.
The clock display will change
in the counter display.
2
Press the SPEED selector
button to select the desired
tape speed SP or SLP.
The counter and SP or SLP
will appear on the screen for
about 4 seconds.
3
Press the direct channel
selection buttons or the
CHANNEL or button to
select the channel to be
recorded.
The channel number will
appear on the screen and
display for about 4 seconds.
4
Press the REC/OTR button to
begin recording. Press the
button again to stop recording
after 30 minutes. Each addi-
tional press of the REC/OTR
button will increase recording
time as shown in the chart
below, up to a maximum of 5
hours. The OTR and recording
time will appear on screen for
about 4 seconds.
NOTES: • Press the REC/OTR
button to increase the
time needed for
recording (See the
chart ).
• To cancel OTR, press
the STOP button or
turn off the power.
20
4E30401B E P20-BACK
SETTING THE TIMER
RECORDING
Timer recording can be programmed on-screen with
the remote control. The built-in timer allows automatic
unattended recording of up to 8 programs within 1
month.
EXAMPLE: Program a timer recording for the 26th day,
channel 125 (CATV), 11:00 - 11:30 PM on timer
program number 1 (Tape speed: SLP).
CHECK BEFORE YOU BEGIN
• Turn on the TV and set to the video channel 3 or 4.
• Press the TV/VCR selector button to select the VCR
mode.
• Load a video cassette with the erase prevention tab
intact. The VCR will automatically turn on.
• Check that the clock and date are correct (see page 15).
When a TV is connected with an audio/video cable,
turn the TV and this VCR on and select the video input
mode on the TV.
1
Press the MENU button.
Check the TIMER REC SET
00 : 00 : 00 SP
option is selected, then press
the ENTER button.
CH 125
2
Press the TRACKING/SET + or
– button to select one of the
program line, then press the
ENTER button.
3
Press the TRACKING/SET +
or – button to select the date,
OTR 0 : 30
then press the ENTER
CH 125
button.
4
Set the start time, end time,
channel and tape speed as in
step 3.
NOTE: To record from external
5
To enter other programs,
repeat step 2 through 4. Or,
press the MENU button twice
Press Recording time
to return to the normal screen.
once
NORMAL REC
6
Press the TIMER REC button.
twice 0:30
The power will go off, the
3 times 1:00
TIMER REC indicator will
4 times 1:30
light and the VCR stands by
5 times 2:00
for recording.
6 times 3:00
7 times 4:00
To cancel timer recording, press the button again and
8 times 5:00
the TIMER REC indicator will go out.
9 times NORMAL REC
20
MENU
CLOCK SET
TIMER REC SET
AUTO REPEAT
CH SET UP
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
〈+/–/ENTER/MENU〉
DATE START
– – – – – – : – –
– – – – – – : – –
– – – – – – : – –
– – – – – – : – –
– – – – – – : – –
– – – – – – : – –
– – – – – – : – –
– – – – – – : – –
〈+ / – /ENTER/CANCEL/MENU 〉
DATE START
-:--
26(SU)
------ -:--
------ -:--
------ -:--
------ -:--
------ -:--
------ -:--
------ -:--
〈+/–/ENTER/CANCEL/MENU〉
source set the channel
to "L". "L" will appear
next to CH 125 (or 69).
17/04/2001, 14:02
ON OFF
ON OFF
END CH
– : – – – – –
– : – – – – –
– : – – – – –
– : – – – – –
– : – – – – –
– : – – – – –
– : – – – – –
– : – – – – –
END CH
-:-- --- -
-:-- --- -
-:-- --- -
-:-- --- -
-:-- --- -
-:-- --- -
-:-- --- -
-:-- --- -