Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT: this unit is shipped without gasoline or oil in the engine.
Be certain to service engine with gasoline and oil as instructed in the
Operation section before starting or running your machine.
NOTE: Reference to right and left hand side of the Lawn Mower is
observed from the operating position.
OpeninG CarTOn
1.
Cut each corner of the carton vertically from top to bottom.
2.
Remove all loose parts.
3.
Remove loose packing material.
remOVinG UniT FrOm CarTOn
1.
Lift unit from the rear to detach it from underlying carton material
and roll unit out of carton.
2.
Check carton thoroughly for any other loose parts.
lOOse parTs in CarTOn
•
side Discharge Cover
•
engine Oil
assemblY
attaching The Handle
1.
Remove any packing material which may be between upper and
lower handles.
a.
Remove wing nuts and carriage bolts handle as shown
in Figure 1. Do not loosen or remove adjacent hex head
screws.
B.
while stabilizing mower so it doesn't move, pivot upper
handle up as shown in Figure 2. Do not crimp cable while
lifting the handle up.
2.
Remove t-bolts from the handle brackets as shown in Figure 3.
A
ASSEMBLY
A
Figure 1
10
B
Figure 2
Figure 3
Publicidad
