Publicidad
Idiomas disponibles
Idiomas disponibles
H O W TO U S E
THE TIME AND STATUS DISPLAY
The time and status display shows the cycle progress and estimated time remaining, cycle
options, and other status messages for your washer.
1
ESTIMATED TIME REMAININg
When the START/PAUSE button is pressed, the
washer automatically detects the wash load
(weight) and optimizes the washing time, based
on the selected cycle and options. The display
will then indicate the estimated time remaining
for the selected wash cycle.
NOTE: The cycle time displayed may appear
much longer than that of a top-loading washer.
The displayed time is for the complete cycle,
rather than just the agitation portion of the cycle,
as is typically shown on a top-loading washer.
2
CYCLE COMPLETION INDICATOR
This portion of the display shows which stage
of the wash cycle is currently underway (LOAD
SENSING, WASH, RINSE or SPIN).
AUTOMATIC LOAD SIZE SENSINg
3
At the beginning of the cycle, the washer tumbles
the load and detects the weight of the clothes.
The display will indicate the approximate load
size in the LOAD SIZE display. This allows you
to adjust the amount of detergent and other
additives for best results and improved efficiency.
20
3
2
4
4
5
1
5
DOOR LOCk INDICATOR
Indicates that the door is locked. The washer
door will lock while the washer is operating. The
door can be unlocked by pressing the START/
PAUSE button to stop the washer.
NOTE: If the temperature in the washer is too
high, the door cannot be unlocked until the
washer has cooled. If the water level is too high,
select the DRAIN & SPIN cycle to drain excess
water. Do not try to force open the door.
DELAY wASH INDICATOR
This indicator shows that the washer has been
set for DELAY WASH. The washer will start
automatically after the set delay time
has passed.
Publicidad
