Rear Panel; Infrared Remote Control - Ecler 2VSP Manual De Instrucciones

(25) Save key, MEMORY: press the MEMORY key then select a memory location or preset using the
numeric keys (19 and 24) and press the MEMORY key again to store the currently tuned frequency
in a memory location from 1 to 60

4.3. Rear Panel

(26) Antenna input strip, ANTENNA: external FM antenna connector
(27) Tuner signal output, TUNER OUT: RCA stereo output for the signal received by the FM tuner
(28) Priority signal output, PRIORITY OUT: RCA stereo output. It delivers the same signal as the
CD/USB/SD card player (output 29) until it disappears (playback stop, end of disc, etc..) then it
switches to the FM tuner audio signal (output 27), ensuring an uninterrupted audio signal output
with priority to the CD/USB/SD card player. The source of the output signal can also be selected
manually by the CD/TUNER key of the remote control
(29) Multi-format player output, CD OUT: RCA stereo output for the CD/USB/SD player audio signal
(30) Power supply receptacle: IEC connection the mains power supply
(31) Fuse holder
(32) Voltage selector

4.4. Infrared Remote Control

(33) PLAY/PAUSE key: starts/pauses the playback of audio files
(34) STOP key: stops the current playback
(35) PROG/MEM key:
•
In CD mode: activates the programming mode, then selects the tracks or program to
be played when the PLAY key is pressed. In this mode the STOP key deletes the
existing program
•
In TUNER mode: press the MEM key then select a memory location or preset using
the numeric keys (38 and 40) and press the MEM key again to store the currently
tuned frequency in a memory location from 1 to 60
(36) FIND/ASM key:
•
In MP3 mode: displays ID3 tags information
•
In TUNER mode: maintaining it 1.5 second will activate the automatic FM stations
search and save
(37) ESP - MO/ST key:
•
In CD mode: activates the "anti-shock" function
•
In TUNER mode: toggles between mono and stereo modes for the FM tuner
7