Connecting To A Mac Using The Usb Cable - Yamaha YVC-300 Manual Del Usuario

YVC-300 User's Manual

Connecting to a Mac using the USB cable

■ Check the following before the connection procedure
Make sure that you have the supplied USB cable available.
In addition, the Mac connected to the product must meet the following system requirements:
• OS: macOS (*1)
• USB: USB 2.0 or later
(*1) For the supported versions, refer to the following website:
http://www.yamaha.com/products/en/communication/
Notes
• You cannot connect and use more than one microphone or speaker including this product to one Mac at the same
time.
• Use the supplied USB cable only. Using a different USB cable may cause the product to malfunction.
• The product must be connected directly to a Mac. Connecting the product via a USB hub may cause the product to
malfunction.
• In rare cases, an audio playback may be interrupted due to Mac usage, such as the workload or limited free space in
memory.
■ Connecting the devices
Connect between the product and a Mac through the supplied USB cable.
Tips
• The product receives power from the Mac through the USB cable (USB bus powered).
• You do not need to install a separate USB driver because the Mac recognizes the product as a standard USB
audio device.
18
To the USB terminal