Yamaha YVC-300 Manual Del Usuario página 33

YVC-300 User's Manual
Symptom
You hear noise.
The remote party
hears noise.
Sound is distorted.
Sound is distorted on
the remote party.
The volume on the
remote party is low.
32
Cause
The remote party has a problem with
their device configuration or operating
environment.
The product has a device that
generates noise near it.
The product is installed in a noisy
room.
A videoconference system connected
to the EXT IN terminal has a high
output level.
The microphone sensitivity on the
remote party is high.
Your microphone has a high input level.
The microphone sensitivity of the PC or
Mac connected via USB is high.
A videoconference system connected
to the EXT OUT terminal does not
provide a line-level input.
A videoconference system connected
to the EXT OUT terminal has a high
output volume.
The speaker volume on the remote
party is high.
The microphone sensitivity of the PC or
Mac connected via USB is low.
A videoconference system connected
to the EXT OUT terminal has a low
output volume.
Action
-
Keep the product as far away
from noise sources as
possible.
If any device is generating
noise, turn it off.
Decrease the output level of
the videoconference system.
Ask the remote party to
reduce their microphone
sensitivity.
Take the product away from
people who are talking.
Reduce the microphone
sensitivity.
(→Page 17, Page 20)
Connect a videoconference
system that supports a line-
level input.
Turn down the volume on the
videoconference system.
Ask the remote party to turn
down their speaker.
Increase the microphone
sensitivity on that machine.
(→Page 17, Page 20)
Turn up the volume on the
videoconference system.