01
English
Deutsch
07
Español
13
Français
19
Italiano
25
What's In the Box
Smart Scale P1
AAA Battery (×3)
Inserting the Batteries
Turn the scale over and place it on a flat surface.
Open the battery door and insert three AAA batteries. Make sure the
positive and negative ends are facing the correct polarity directions
marked in the battery compartment.
- The digits "
" will show on the LED display.
Close the battery door and wait until the digits "
LED display.
will appear on the LED display when the batteries are low.
Replace all three batteries at the same time. Do not mix new and used
batteries.
English
Owner's Manual &
Other Documents
" are shown on the
01