Publicidad
Idiomas disponibles
Idiomas disponibles
30
MAGIC REMOTE CONTROL FUNCTIONS
Registering Magic Remote Control
The Magic Remote Control operates by pairing with your
TV.
Please register the remote as follows.
How to register the Magic Remote Control
To register automatically, turn the TV
on and press the
registration is completed, the completion
message appears on the screen.
If registration fails, turn the TV off and
(Wheel)
back on, then press the
complete registration.
How to Re-register the Magic Remote Control
1 Press and hold the
BACK
SMART
buttons together for 5
seconds to reset, then register it by
following "How to register the Magic
remote control" above.
SMART
2 To re-register the Magic remote control,
press and hold the
seconds toward the TV.
How to use Magic Remote Control
1 You can move the pointer by aiming the
Pointer Receiver of the remote control
at your TV then move it left, right, up or
down.
»
If the pointer does not work properly
leave the remote control for 10 seconds
then use it again.
2 If the pointer disappears, move the
remote control slightly to left or right.
Then, it will automatically appear on the
screen.
»
If the pointer has not been used for a
certain period of time, it will disappear.
Wheel (OK). When
Wheel (OK) to
BACK and
BACK button for 5
If you press
Wheel (OK) on the Magic
remote control, the screen appears.
1
Shows information about the current program
and screen.
2
You can select My Apps Menu.
Precautions to Take when Using
the Magic Remote Control
Use the Magic remote control within the maximum
y
communication distance (10 m, 32.8ft). Using the
remote control beyond this distance, or with an object
obstructing it, may cause a communication failure.
A communication failure may occur due to nearby
y
devices. Electrical devices such as a microwave oven
or wireless LAN product may cause interference, as
these use the same bandwidth (2.4 GHz) as the Magic
remote control.
The Magic remote control may be damaged or may
y
malfunction if it is dropped or receives a heavy impact.
Take care not to bump into nearby furniture or other
y
people when using the Magic remote control.
Manufacturer and installer cannot provide service
y
related to human safety as the applicable wireless
device has possibility of electric wave interference.
It is recommended that an Access Point (AP) be
y
located more than 1 m (3.28 ft) away from the TV. If
the AP is installed closer than 1 m (3.28 ft), the Magic
remote control may not perform as expected due to
frequency interference.
Publicidad
