Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
Fig. A
1. MOUNTING ACCESSORIES
For all work or when changing
CAUTION
accessories, always wear protective gloves. Avoid
risk of injury from the sharp edges of the accessories.
Accessories can become very hot while working,
presenting danger of burns. Make sure the tool is
unplugged prior to changing accessories.
2. TO CHANGE ACCESSORIES
To reduce the risk of injury, do
WARNING
not let the sharp side of the accessory face
back toward the user's hand.
NOTE: The flange will need to be completely
removed to install certain accessories that do
Open-Ended
not have an open-ended connection interface.
The tool-less blade change lever allows you to
change the accessories without using a hex key.
•
Flip the tool-free blade release lever forward
to the open position to loosen the flange. (Fig. A).
Fig. A
Fig. B
Closed-Ended
Open-Ended
Fig. E
Fig. D1
Closed-Ended
OPERATION
•
Insert the accessory onto the accessory
interface, then (if necessary, re-insert the
flange) press down the flange with finger to
keep the blade temporarily secure. (Fig. B)
Fig. B
•
Flip lever back down to seated position to
Fig. D1
secure accessory. (Fig. C)
Fig. C
Fig. B
NOTE: For Dremel and Porter Cable any other
brand blades, before inserting them, the adapter
Fig. D2
Fig. D1
should be installed first and fitted with the spare
flange. (Fig. D1, D2).
F
Fi
Fi
Page 9
Publicidad
