Publicidad
Idiomas disponibles
Idiomas disponibles
Installation (continued)
5
Securing the faucet assembly
□
Install the plastic washer (B), and metal washer
(C) onto the threaded mounting shank.
□
Thread the nut (D) onto the mounting shank.
Lock the nut (D) into position by tightening the
screws (E). Do not overtighten.
B
C
D
E
6
Attaching the quick connector
to the hose
□
After inserting the hose through the hole in the
sink surface, reattach the quick connector (F)
by screwing it onto the threaded end of the
hose (1) in a clockwise motion. Hand tighten
only.
F
1
6
Publicidad
