VIDEO DOOR ENTRY SYSTEM MONITOR
ENG - 21
TURNING ON THE AUTO SWITCH-ON SYSTEM
Push the auto switch-on button
. You will be able to see the image captured by
the camera, open the street door, and establish communication
with the entrance
panel.
If any monitor is active, you will not be able to use automatic switch-on and the
button flashes indicating that the system is busy. In such a case, wait until the system
is unoccupied again.
Conversation
Time of autoswitch-on:
time: 60 sec.
30seconds
Pick up
Autoswitch-on
The calls from the entrance panel have priority over the auto switch-on system. If
a call is made from the entrance panel during the time of auto switch-on, the video
of your monitor will switch off, and the monitor will change to stand by status
automatically, ensuring the privacy of the call.
For buildings with several points of entry, hold down the automatic switch-on
button
for 2 seconds each time you wish to cycle through the videos from one
entrance panel to the next.
Auto switch-on
Auto switch-on