USING THE CLOD WATER & ICE
DISPENSER
Push the appropriate ice type button to
select what you want to dispense.
Using the ice lever ( 1 )
Push the Ice lever dispenser ( 1 ) gently with your
glass. Ice will be released from the dispenser.
You can choose the type of ice by pushing the
cubed or crushed button fi rst.
Using the Water lever ( 2 )
Push the Water lever dispenser
( 2 ) gently with your glass.
Water will be released from the
dispenser.
• If you push the water and Ice lever at about
the same time, the dispenser operates only
the option you actually selected or pushed
fi rst.
• Please wait 1 second before removing
the glass after dispensing water to
prevent spills. Do not pull out the
dispenser lever after dispensing ice or
water. It comes back automatically.
Using the Ice & Water Dispenser together
To get Ice and water, push the Ice lever ( 1 ) fi rst
for ice, then move your glass down and press the
water dispenser lever ( 2 ) for water.
DA68-03013A-13.indb 36
DA68-03013A-13.indb 36
All manuals and user guides at all-guides.com
Maintaining the Ice Bucket
• To clean the ice bin/bucket, wash with a mild
• Ice is made in cubes. When you select
• When you select Cubed Ice after using the
• The ice cubes generated by the rapid ice
• If ice doesn't come out, pull out the ice bucket
NO ICE
NO ICE
Select this if you want
Select this if you want
to turn ice maker off
to turn ice maker off
• Do not press the Test button continuously if
1
1
Making Ice
• To fi ll the ice bucket to maximum capacity after
2
2
1. Allow your refrigerator to operate and cool
- Waiting 24 hours will allow your ice maker to
2. Dispense 4 to 6 ice cubes into a glass.
3. After another 8, and then 16 hours, dispense a
• To test the ice maker, press the Test button
• The chime sounds automatically again to let
English - 36
detergent, rinse well, and dry thoroughly.
Do not use harsh or abrasive cleaners or
solvents.
"Crushed", the ice maker grinds the ice cubes
into crushed ice.
Crushed Ice mode, a small amount of residual
crushed ice might be produced.
making process will look white, which indicates
they are generated normally.
and press the Test button located on the right
side of ice maker. See the illustration under
Making Ice below.
the tray is fi lled with ice or water. Water may
overfl ow or ice may jam the bucket.
installation, follow these steps:
down for 24 hours (or 1 full day).
cool properly.
full glass of ice.
on the ice maker. You will hear the refrigerator
chime (ding-dong). When the chime sounds,
release the Test button.
you know the ice maker is working well.
2015. 8. 26.
2015. 8. 26.
10:30
10:30