Publicidad
SETTING THE CLOCK
Touch CLOCK pad. This is a 12 hour clock.
1.
Touch CLOCK pad once more. This is a 24 hour
2.
clock.
Use the number pads to enter the correct time. If
3.
you selected 12 hour clock sys tem, the digital
clock allows you to set from 1:00 to 12:59. If you
selected 24 hour clock system, the digital clock
allows you to set from 0:00 to 23:59.You must
touch at least three numbers to set the clock(one
for hour and two for minutes).
Touch CLOCK pad again.
4.
NOTE: When the oven is first plugged in or when
power resumes after a power interruption, the display
will show ENTER CLOCK TIME. If you prefer to not
have the clock displayed, touch RESET.
You can check the clock time while cooking is in
progress by touching the CLOCK pad.
SETTING THE OVEN TIMER
Touch TIMER.
1.
Enter the amount of time by touching the number
2.
pads. Digit time is in minutes and seconds and set
left to right. Set one digit (a 5 for 5 seconds) or up
to four digits (2405 for 24 minutes, 5 seconds).
Touch START/STOP.
3.
NOTE: Time countdown can be seen in display for 3
seconds before clock or cooking time is returned to
display.
Touch TIMER and then touch RESET to cancel
TIMER during timing process.
SETTING A COOKING PROGRAM
A. One-stage Cooking
Use the number pads to set a cooking time. You
1.
can set a cooking time from one second to 99
minutes and 99 seconds.
If you want to set a power level other than 100%
2.
power, touch POWER/MUSIC, then use the
All manuals and user guides at all-guides.com
14
number pads to enter the power level. You can
set the power level from 1 to 9.
Use single digits to set a cooking power level:
Number pad
Cooking power
9
8
7
6
5
4
3
2
1
Touch START/STOP to start cooking.
3.
B. Multi-stage Cooking
You can program oven for 4 cooking stages. Each
stage can be programmed with a different power level
and time. To program 2-stage, 3-stage or 4-stage
cooking, repeat the one-stage cooking steps 1 and 2
and touch START. The oven will automatically proceed
to the end of cooking stages.
NOTE:
After stage 1 time has elapsed, two beeps sound,
signaling the beginning of stage 2. After total time
has elapsed, 4 beeps sound and END appears in
display. Touch RESET pad or open oven door to
clear END before starting another cooking function.
SPEED DEFROST
Touch SPEED DEFROST.
1.
Enter desired defrosting time by touching correct
2.
number pads. Digital timer sets minutes and
seconds from left to right so a single digit can be
set (5 for 5 seconds ) or up to 4 digits (2405 for 24
minutes 5 seconds).
Touch START/STOP.
3.
90%
80%
70%
60%
50%
40%
30%
20%
10%
Publicidad
