Publicidad
Idiomas disponibles
Idiomas disponibles
Table Fan 16"
TVM016110MD
REMARKS:
Electrical connections shall be in accordance with national or local codes. Read and sabe this instruc-
tion manual.
WARNING: BE SURE TU SHUT OFF ELECTRIC SUPPLY AT MAIN SWITCH OR CIRCUIT BREAKER BEFORE
INSTALLATION. THE IMPORTANT SAFEGUARDS AND INSTRUCTION APPEARING IN THIS MANUAL ARE NOT MEANT
TO COVER ALL POSIBLE CONDITIONS AND SITUATIONS THAT MAY OCCUR. IT MUST BE UNDERSTOOD THAT
COMMON SENSE, CAUTION AND CARE ARE FACTORS WHICH CANNOT BE BUILT INTO ANY PRODUCT. THESE
FACTORS MUST BE SUPPLIED BY THE PERSON(S) CARING FOR AND OPERATING THE UNIT. NO RESPONSIBILITY
WILL BE ACCEPTED FOR ANY DAMAGE WHICH MAY OCCUR DURING TRANSPORT OR IR ANY PORTION OF THE
PRODUCT HAS BEEN ALTERED OR MODIFIED.
CAUTION
1. Improper installation may result in the risk of fir, electric shock, or injury to persons.
2. To prevent risk of fire and electric shock, do not use the unit near Windows.
3. Power plug must be removed from the power sock before cleaning, servicing, maintenance and move from
one location to another.
4. The fan should not be placed in a damp place or where humidity is high (such as in a bathroom).
ASSEMBLY
1. Putt he stand and switch body to the base.
2. Loosen Guard mounting Nut from the motor Housing.
3. Position the blade along motor shaft, fasten it firmly with blade nut by turning counter clockwise. Hang the
front guard to Rear Guard with the position fixer provided at the rim guard, and then fix together with guard
ring screw tightly.
OSCILLATION CONTROL
1. Push the oscillation knob to oscillate.
2. Pull the oscillation knob to stop.
5
Publicidad
