Publicidad
Idiomas disponibles
Idiomas disponibles
button,Each time the 'Speed' button is pressed, an icon will appear on the LED screen
indicating the current speed level.
3.
Timer: Press 'Timer' button to set the fan running time between 1-12 hours, which switches
the unit tostandby after preset time. Each time the button is pressed, the hours will increase
one by one and the time indicator will light on the screen. To cancel the timer, simply press
the button until the indicator shows"00"
4.
Swing: Press 'Swing' button to change the wind direction. The swing icon will appear on
the screenwhen the function is activated. Press the button again to stop the oscillation. The
vertical direction of air flow can be adjusted manually by directing the outlet louvers up and
down.
5.
Cooler: To activate the air cooler function, please press the "Cooler" button. Water pump will
take the water from the tank and pour it onto the cooling pad. Cooling pad absorbs the heat
EN
of the water and the evaporated air is blown out by the help of fan. The cool breeze blown by
the cooler drops the temperature and creates a relaxing cooling effect.
Caution: If the water Level is low or there is no water in the tank, do not activate the 'Cooler'
function. Check the water level and add water if needed_ Replace the stale water with fresh
water. It is recommended to replace water in the tank at least once in a week.
6.
Ionizer Press 'Ion' button to activate the ionizer function. Ion icon on the screen will light and
thenegative ion release will start. Ions attract to tiny particles in the air such as dust pollen,
mold sporesetc. Which cause them to become too heavy to remain airborne. This feature let
us to have dean air inthe environment.
7.
Remote control: Works with CR2025 button cell. Before use, please pull out the card which is
insertedat the button of the remote control.
OPERATING THE WATER TANK
Check the level of water in the tank frequently. Be sure that water level is rat below the 'MIN'
markingwhich is located on the water lank. Activating the 'Cooler' function with insufficient amount
of water maycause malfunction of the water pump and the warranty of your product will be void.
Before refilling water, turn your unit lo `Off position by pressing the switch located on the back
panel andunplug the power card.
USING THE ICE TUBES
In order to increase the cooling effect of your fan, you can use ice tubes which are supplied with
theunit. Before using, fill them with water and place them in the freezing compartment of your
refrigeratorfor a few hours. Then place them into the large section of the tank and add water to
the 'MAX' level.Using the ice tubes will drop the temperature of the air flow which will create more
effective coolingeffect.
CLEANING AND MAINTENANCE
After operation for long time, the dust cumulated in the dust filter or cooling pad may influence the
inflowof air. Therefore, it is recommended to clean your fan regularly. Please follow the steps below
to cleanyour device.
Turn off the unit and unplug the power cord before cleaning and maintenance.
10
Publicidad
