Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING! FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS INJURY!
USING THIS MACHINE WITH RESPECT AND CAUTION WILL CONSIDERABLY
LESSEN THE POSSIBILITY OF PERSONAL INJURY.
SAFETY RULES FOR THE 9" FLOORING CUTTER
1. READ AND UNDERSTAND THIS INSTRUCTION MANUAL BEFORE OPERATING THE
9" FLOORING CUTTER.
2. If you are not thoroughly familiar with the operation of the 9" Flooring Cutter, obtain
advice from a qualified instructor or call 866-435-8665.
3. Stay alert. Do not operate while under the influence of drugs, alcohol,
or medication.
4. Always wear safety approved eye protection with side shields (ANSI Z87.1).
5. Keep work area and free of debris.
6. Keep children and unauthorized persons away from the 9" Flooring Cutter and work area.
7. Make sure tool is secure. Operate only on a firm substrate or solid stand.
8. Use the right tool. Do not force the 9" Flooring Cutter or use it for a job for which it was
not designed; use only on approved materials.
9. Keep blade sharp. A dull blade will not perform properly.
10. Always keep hands away from blade while operating or carrying.
11. Do not alter or misuse this tool. The 9" Flooring Cutter is precision built; modifications not
specified in this manual may result in a dangerous condition.
12. Maintain the 9" Flooring Cutter with care. Keep blade sharp and clean. Follow instructions
for lubricating and changing accessories.
13. Use only recommended accessories. The use of improper accessories may cause hazards
or injury.
14. Never leave the 9" Flooring Cutter unattended. Secure the handle with the lock chain when
not in use.
15.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known (to the State of California) to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and other masonry products, and
• Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are specially designed to filter
out microscopic particles.
- 1 -
Publicidad
