Yeyian SIGURD 2502 Manual Del Usuario página 5

Self-inspection
If the monitor inspects that there is no horizontal and vertical signal, it will prompt
to check the video input, please refer to the illustration below, and the monitor will
enter into power saving mode after several seconds, the indicator will light red.
The screen will restore to normal display once receiving video signal.
Image Adjustment
Please, adjust the image according to your need; please refer to the operation
section.
ON SCREEN DISPLAY NAVIGATION
On-screen menu buttons
Button
Auto Automatic adjustment of monitor settings / Return to back menu
Menu Open the on-screen menu and select the sub menu
Go up in the on-screen menu. Increase the value of a selected item
Go down the on-screen menu. Decrease the value of a selected item
Power Turn the monitor on or off
Action