RANGEFUL Spear 300 PRO Manual De Instalación página 24

5. Troubleshooting
a. Why is there still no network signal after
installing the equipment?
Debugg:
1. Check if the repeater is turned on and its power supply is
connected to the mains.
2. Check the connection of the outdoor antenna and repeater.
3. Make sure the outdoor signal is strong.
4. Make sure the outdoor antenna is installed properly.
5. Check the connection between the indoor antenna and the
repeater.
6. Make sure the coax cable type meets the system requirements.
7. Make sure that the repeater you are using meets the
communication standards used by the mobile operator at the
nearest base station.
b. Why is the signal level low in the outermost
parts
Debugg:
1. Make sure the outdoor antenna is facing the right direction.
2. Check how strong the outdoor signal is.
3. Check the quality of connections between all components of
the system.
4. Relocate the outdoor/indoor antenna.
5. Make sure the cable type meets the system requirements.
6. Use an additional indoor antenna.
7. Use a more powerful repeater or install an antenna amplifier
and / or booster in addition to the repeater.
24