claber MODULO 9V evolution Manual Del Usuario página 24

Daily programming
If subsequent programs are to be set, repeat the same procedure.
Warning: programs can be added only in numerical and chronological
increasing order. If changes are to be made, programs cannot overlap.
Example: Program 1 (LINE A): 06:00 (OPEN), 06:10 (CLOSED)
Program 2 (LINE B): 08:00 (OPEN), 08:30 (CLOSED)
Program 3 (LINE A): 20:00 (OPEN), 20:15 (CLOSED)
To set the second open time on LINE A (Program 3), fi rst select
Program 2 and set an open time on LINE B; If necessary, Program 2
can be selected temporarily and then cancelled later.
Deleting
daily programs
1. Select the CLOSED page of the program to be deleted.
2. Press ENTER .
1
3. Press the and keys simultaneously
1
38
All manuals and user guides at all-guides.com
.
2
2
Weekly programming
Note: after setting one or more
daily programs for the fi rst time,
the number
1
is associated with the current day
of the week and indicated on the
CLOCK page. If the current day is
Monday, for example, then 1=Mon-
day, 2=Tuesday, 3=Wednesday,
etc.
With the weekly programming,
watering can be deactivated or re-
activated on one or more days of
the week.
1. Select the WEEKLY PROGRAM page.
2. Press ENTER.
3. Position the cursor on the day of
the week for which the setting is to
be changed.
4. Press ENTER to exclude that day
from the watering cycle (the relative
number disappears from the dis-
play), or to restore it again.
5. To quit the function, position the
cursor on exit and press ENTER.
UK
39