Sundstrom SR 507 Instrucciones De Uso página 20

4.4 Change parts
Always use genuine Sundström parts. Do not modify the equip-
ment. The use of non-genuine parts or modifica tion of the equip-
ment may reduce the protective function and put at risk the appro-
vals received by the product.
4.4.1 To change the control valve
The control valve is a complete, sealed unit. Don't attempt to
repair or modify it.
5. Technical specification
Weight
Weight without control valve: approx. 60 g.
Materials
Plastic parts are marked with the material code and recycling
symbol.
Working pressure
5–7 bar (500–700 kPa) measured at the connection to the control
valve.
Air flow rate
From 175 l/min to 260 l/min measured in the head-top.
Manufacturer's minimum design flow: 175 l/min.
Compressed air supply tubes
The following tubes have been granted type approval together with
Sundström compressed air equipment. The tubes are complete
with safety couplings/nipples:
• SR 358. 10/16 mm plastic tube made of polyester reinforced
PVC. Resistent to oil and chemicals. 5–30 m.
• SR 359. 9.5/19 mm rubber tube made of polyester reinforced
EPDM. Antistatic and heat resistant. 5–30 m.
• SR 360. 8/12 mm plastic spiral tube made of polyurethane.
2, 4, 6 and 8 m.
The tubes should be used separately. It is not allowed to join
tubes together.
Compressed air supply tubes AS/NZS
Approved tubes must be used if Australian Standards approval is
to be valid. Tubes from 5–30 m or coupled to 90 m may be used.
Temperature range
Storage temperature: from -20 to +40 °C and a relative humidity
below 90 %.
Service temperature: from -10 to +55 °C and a relative humidity
below 90 %.
Shelf life
The equipment has a shelf life of 10 years from the date of manu-
facture.
6. Key to symbols
See user instructions
CE approved by
2849
INSPEC International B.V.
Relative humidity
<XX% RH
+XX°C Temperature range
-XX°C
20
7. Approval
• SR 507 together with head tops SR 520 M/L, SR 530,
SR 540 EX, SR 561, SR 562, SR 570, SR 580, SR 584/SR 580,
SR 592 or SR 900/SR 951 and compressed air supply tube
SR 358 or SR 359: EN 14594:2005, class 3B.
• SR 507 together with head tops SR 520 M/L, SR 530,
SR 540 EX, SR 561, SR 562, SR 570, SR 580, SR 584/SR 580,
SR 592 or SR 900/SR 951 and compressed air supply tube
SR 360: EN 14594:2005, class 3A.
The PPE Regulation (EU) 2016/425 type approval has been issued
by Notified Body 2849. For the address, see the reverse side of
the user instructions.
The EU declaration of conformity is available at www.srsafety.com
UKCA
UKCA Type-examination by UK Approved Body No 0194, INSPEC
International Ltd, 56 Leslie Hough Way, Salford, Greater Manches-
ter, M6 6AJ, United Kingdom.
The UKCA declaration of conformity is available at www. srsafety.com
Australian StandardsMark
The Compressed Air Attachment SR 507 is tested and certified to
comply to AS/NZS 1716:2012.
The StandardsMark is issued under licence by SAI Global Pty
Limited Lic No. 766 (ACN 108 716 669, "SAI Global").