Descargar Imprimir esta página

Roborock S8+ Manual Del Usuario página 13

Ocultar thumbs Ver también para S8+:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 45
Water Tank
C7
* Clean as required.
C7-1—
Open the water tank and fill it with
clean water.
C7-2—
Close the water tank and shake it gently.
C7-3—
Pour out the remaining water as shown.
VibraRise Mop Cloth
C8
* Clean after each use and replace every 3-6 months.
Remove the VibraRise mop cloth from
C8-1—
the VibraRise mop cloth mount. Clean
the VibraRise mop cloth and air-dry it.
Note: A dirty VibraRise mop will affect the mopping
performance. Clean it before use.
Robot Sensors
C9
* Clean monthly.
Use a soft, dry cloth to wipe and clean all
sensors, including:
C9-1—
Wall Sensor
C9-2—
Reactive 3D Obstacle Avoidance
Sensor
C9-3—
Carpet Sensor
C9-4—
Cliff Sensors
Dust Bag Replacement
C10
* Replace as required.
C10-1—
Remove the dustbin cover vertically
as shown.
C10-2—
Lift the dust bag out of the dustbin
and discard it.
Note: The dust bag handle seals the bag on removal to prevent
dust leakage.
C10-3—
Clean the filter with a dry cloth.
C10-4—
Install a new dust bag in place
along the slot and put the dustbin
cover back.
Air Duct
C11
* Clean as required.
C11-1—
Unscrew the screws (10) and
remove the cover.
C11-2—
Wipe the air duct and cover with a
dry cloth.
C11-3—
Reinstall the cover and screw it
back in place.
Charging Contact Areas
C12
* Clean as required.
Use a soft dry cloth to wipe the charging
contacts on the robot. Clean the dock
location beacon, charging contacts, and
electrode brushes on the dock.
Battery
The robot is equipped with a built-in high-
performance lithium-ion rechargeable battery
pack. To maintain battery performance, keep
the robot charged during normal use.
Note: If the robot will be left unused for a long period, turn it
off and charge it at least every three months to avoid battery
damage caused by over-discharge.
12
Basic Parameters
Robot
Model
S80ULT
14.4V/5200mAh (TYP)
Battery
lithium-ion battery
Rated Input
20VDC 1.2A
Charging Time
< 6 hours
Note: The serial number is on a sticker on the underside of
the robot.
Auto-Empty Dock
Name
Auto-Empty Dock
Model
AED06HRR, AED07HRR
Rated Input Voltage
220-240VAC
Rated Frequency
50-60Hz
Rated Input
5A
(Dust Collection)
Rated Input
0.5A
(Charge)
Rated Output
20VDC 1.2A
14.4V/5200mAh (TYP)
Charging Battery
lithium-ion battery

Publicidad

loading