NISBETS ESSENTIALS CU759 Manual De Instrucciones página 4

EN
Operation
Do not install the appliance in an area where a water jet
could be used.
Before using for the first time, clean the interior with
warm water.
1. Remove the appliance from the packaging. Make sure
that all protective plastic film and plastic coatings are
thoroughly removed from all surfaces.
2. Ensure the Temperature Control knob is set to 'OFF' .
3. Remove the lid and fill the appliance to at least half of
its capacity.
4. Replace the lid.
5. Connect to the mains power supply.
6. Set the Temperature Control knob to the required
temperature setting. The 'BOIL' indicator light
illuminates and the appliance begins to heat water.
7. When the water has reached the set temperature the
'BOIL' Indicator light turns off and
the 'KEEP WARM' indicator light illuminates.
WARNING: Reduce the set temperature if the water begins to boil. DO NOT allow the water to boil
constantly.
Note: Once the water temperature drops 5-10ºC then the appliance will reheat the water.
WARNING: If the Temperature Control Knob is set to or close to 'HIGH' then the appliance will constantly
heat the water until knob is turned to 'OFF" or the temperature is reduced.
Serving
4
CU759_ML_A5_v1_20230209.indb 4 CU759_ML_A5_v1_20230209.indb 4
Lid
Handle
Tap
KEEP WARM
indicator light
BOIL indicator
light
Temperature Control knob
2023/2/9 15:44 2023/2/9 15:44