Technaxx TX-182 Manual De Instrucciones página 29

Display symbols
MicroSD card Recording mode Battery indicator
Available button alternatives
Exit – Press the On/Off Menu button to leave the setting mode
Set – Press OK to select and save the selected setting
Before the start
Charge at least 5 hours before using it for the first time!
Note: When the battery is completely depleted, it will need approximately
5 hours for a full charge!
The TX-182 allows you to record video materials from a range of video
sources, such as Video8, Hi8, SVHS, VHS, VCD, DVD, VCR or DV. You
can also take snapshots of the video material.
The MicroSD card saves your recording in AVI format. File size is 13-15MB
per minute.
Any segment you record that is more than 90minutes long is divided into
parts.
The file name is automatically created in order (0001, 0002, etc.). The files
can then be transferred to a PC and be renamed.
Charging the battery
Charge the TX-182 for at least 1 hour before turning it on. Note: The device
has no LED indicator to show whether the device is charging or is fully
charged. Only way to see the battery status is to turn on the device.
The built-in battery can be charged in two ways:
A Via the main power socket
Use:
- USB power adapter
- MiniUSB Data/Power cable
7
Model: TX-182 Article No. 4980, 01/2022