Publicidad
Idiomas disponibles
Idiomas disponibles
Recording
Note: ⚫ The max file length of a recording is 90minutes. After that a new
file is created automatically. ⚫ It could also be possible that bottom and top
be cut off while recording.
1. Connect your TX-182 to a video source.
2. Turn on the video source.
3. Turn on the TX-182.
4. Make sure the video source image is shown on the TX-182 display.
5. Press the REC button to begin recording. The
counter in the top right corner of the display turns red.
6. Press PLAY on the video source to begin playing your video. The movie
is now also visible on the display of the TX-182.
While your movie is being recorded, you can do the following:
A Record the movie without sound
Press
button once to turn off the sound (Just
mutes recording not the device). Press
once more and the sound is on again.
Note: The loudspeaker of the TX-182 playbacks the
audio even when you mute the recording.
B Take snapshots
Press the
recording and change to Snapshot mode. Press
button again will take a snapshot and save
the snapshot.
Note: The video material is playing along even you
press the
needs to be coordinated by the video source.
7. Press the REC button to stop and save the recording.
Note: You also can record video material while the device is connected
with the USB power adapter.
button it will stop and save the
on the TX-182. The play/pause
button
Model: TX-182 Article No. 4980, 01/2022
14
Publicidad
