EN
•
If parts of the machine are damaged, do not use the
machine.
•
If you do not have all the parts, do not operate the
machine.
•
If parts are damaged or missing, contact the service
center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance with
local regulations.
8.2
LOAD THE BRAD NAILS
Do not point the machine at yourself or others when loading
the nails. Failure to do so can cause possible serious
personal injury.
1. Remove the battery pack from the machine.
2. Press the magazine release button and pull out the
magazine cover.
3. Place the nails into the track of the magazine channel
with nail tips pointing down and resting on bottom of the
channel.
4. Close the magazine cover until it securely snaps into
place.
5. Reinstall the battery pack.
WARNING
NOTE
English
8.3
INSTALL THE BATTERY PACK
•
If the battery pack or charger is damaged, replace the
battery pack or the charger.
•
Stop the machine and wait until the motor stops before
you install or remove the battery pack.
•
Read and understand the instructions in the battery and
charger manual.
1. Align the lift ribs on the battery pack with the grooves in
the battery compartment.
2. Push the battery pack into the battery compartment until
the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
8.4
REMOVE THE BATTERY PACK
1. Push and hold the battery release button (9).
2. Remove the battery pack from the machine.
9
OPERATION
Before you operate the machine, read and understand the
safety regulations and the operation instructions.
Be careful when you operate the machine.
10
OPERATION
Do not use any attachments or accessories not
recommended by the manufacturer of this product.
8
9
WARNING
IMPORTANT
WARNING
WARNING