MODES AND FUNCTIONS
LED backlight
Press the LED button (1, Fig. A) to turn on the backlight. Press and hold to
EN
turn off.
Bluetooth
Turn on the speaker. On your mobile device, go to Bluetooth settings and
search for available devices. Soundbeat Box will appear on the list - select this
device from the list to connect. A successful pairing process will be signaled
by a short sound signal. If unsuccessful, turn off and on the speaker and try
to connect again. After a successful pairing process, your mobile device will
automatically connect to the speaker.
Recording
To use the recording function, insert a microSD/TF card into the device's
microSD/TF port (10, Fig. A). Press and hold the recording function button
(2, Fig. A) to start recording.
FM Radio
Turn on the speaker. Use the mode switch button to select the radio mode. To
begin automatic search of available radio stations, press and hold the button
. The stations will be automatically saved. To switch between stations,
use
hold
0-9 buttons (12, Fig. B).
Playing from an external device
1.
Turn on the speaker, and then connect the external device to the AUX
port (11, Fig. A).
or
button. To begin manual search of radio stations, press and
or
button. Saved radio stations can also be selected using the