KanDao Meeting Ultra Manual De Instrucciones página 20

Video
�. EV： Adjust the exposure value to adapt to different brightness environment.
Press the "Settings" button on the remote controller to adjust the exposure
value in a video conference.
�. Video Inversion： When it is on, the view will be inverted. This setting applies
to scenarios where the device is installed upside down.
�. Video Flip： When it is on, the view will be flipped horizontally. This setting
applies to the conferencing software with mirroring function.
�. Resolution： Switch the resolution.
�. Tracking Sensitivity： Adjust the speed of intelligent switching between
tracking targets in the Smart Conference Views.
*Notes
Some of the camera's parameters will be synchronized to the "USB Mode"
once set. See the following "III. Instructions for the USB Mode" for more
information.
Camera Settings
Video
Exposure Value
HDR
Video Inversion
Video Mirroring
Resolution
Encoding format
Tracking Sensitivity
Mic Noise Reduction
Adjust the noise suppression level for the meeting you're currently in.
High Low
EN