Adler europe AD 3216 Manual De Uso página 4

or right after it because they are very hot.
17. In case of blocking toasts in slots and impossibility of automatic release after time`s out,
unplug the device from mains, wait until cool down and remove toasts with wooden
utensils.
18. The bread may burn, therefore do not use the toaster near or below combustible
material such as curtains.
19. Accessible surface temperatures can be high when the appliance is
operating. Never touch the hot surfaces of the appliance.
20.The device is not designed to work with external schedulers or separate remote control
system.
21. Children aged 3 to 8 years old can enable and disable the device only when it is in its
normal position of use, they are supervised or instructed on the safe use and understand
the resulting risks. Children aged 3 to 8 years old can not connect device, operate, clean or
maintain.
22. Keep the appliance and its cord out of reach of children less than 8 years.
DESCRIPTION OF THE DEVICE: TOASTER AD3216
1. Slots for bread
4. STOP button
7. Defrost button
BEFORE FIRST USE
1. Make sure that the socket outlet has a suitable ground connection.
2. Before using the device for the first time, run it without any products for a few minutes. Turn the knob (3) to maximum position to let the
new heating element to burn off residues from production process.
3. Push the lever (5) down until it will be blocked. lt is normal for it to give off a little smoke at the start, after 2-3 minutes the device is
ready to operate.
4. Do not insert oversized slices of bread, metal foil package, or metal utensils onto the toaster. This may result in electric shock.
5. If the bread sticks in the toaster, unplug it. Wait to cool down, then remove the bread. NEVER USE METAL UTENSILS TO REMOVE
THE BREAD.
6. Do not start using the device without the bread located inside slots.
USING THE DEVICE
1. Set the desired browning level from 1 (little) to 7 (max browned at max temperature) by the knob (3).
2. Make sure that thickness of bread slices allow to place them into slots (1).
3. Place the bread into the slots (1) and push the lever (5) down till locked position. Locking is possible only if the power cord is connected
with socket outlet.
4. When the toasting cycle has finished, the lever (5) returns to its up position automatically and bread slices will pop up at the top of the
slots.
WARNING: Bread remains hot for a while after toasting cycle is completed.
5. If bread slices are not browned well, adjust the browning level by turning the knob (3) and repeat the cycle looking at the browning level
if no need to stop the heating of bread.
WARNING: Pressing STOP button (4) interrupts the toasting cycle and releases the bread.
6. The grid (8) is for heating buns and croissants that do not fit in slots (1).
7. The defrost button (7) is to defrost the frozen bread and toast it. After pressing the defrost button (7) , the indicator light next to the
button will illuminate. The toasting time will be enlarge for defrosting.
8. The reheat button (6) is to reheat the bread already toasted and got cold already. After pressing the reheat button (6) , the indicator
light next to the button will illuminate. The toasting time will be reduce for reheating.
CLEANING AND MAINTENANCE
1. Before cleaning the device, make sure that it is unplugged. Do not use steam cleaning machines for cleaning.
2. Never immerse the device in water or any other liquids.
3. Smudged toaster's housing clean only with soft, wet cloth. Do not use abrasive sponges/cleaners.
4. Crumb tray (2) should be cleaned regularly by dry cloth.
5. After cleaning, wait few minutes to let the device dry completely before next use.
TECHNICAL DATA:
Power supply: 220-240V ~50-60Hz
Power: 750W
Max power: 1000W
2. Crumb tray
5. Lever
8. Bun warmer grid
To protect your environment: please separate carton boxes and plastic bags and
dispose them in corresponding waste bins. Used appliance should be delivered to
the dedicated collecting points due to hazarsous components, which may effect
the environment. Electrical appliance must be returned in order to reduce its reuse
and utilization. If the device contains batteries they should be delivered to
dedicated points separatelly.
4
3. Knob
6. Reheat button
9. Cord storage (at the buttom)