Grundfos AMD.05-08 Instrucciones De Montaje página 4

English (GB) Installation and operating instructions
Original installation and operating instructions
CONTENTS
1. Symbols used in this document
2. General description
2.1 Applications
3. Type key and nameplate
3.1 Type key
3.2 Nameplate
4. General safety instructions
5. Storage
6. Installation
6.1 Positioning
6.2 Installation instructions
7. Electrical connection
7.1 Motor protection
7.2 Direction of rotation
8. Startup
9. Service
9.1 Spare parts
9.2 Contaminated mixer
9.3 Service chart
9.4 Oil in shaft seal housing
10. Fault finding
10.1 Fault finding chart
11. Service kits
12. Technical data
12.1 Sound pressure level
13. Disposal
Warning
Prior to installation, read these installation
and operating instructions. Installation and
operation must comply with local
regulations and accepted codes of good
practice.
4
1. Symbols used in this document
Warning
Page
If these safety instructions are not
observed, it may result in personal injury.
4
4
If these safety instructions are not
5
Caution observed, it may result in malfunction or
damage to the equipment.
5
5
Notes or instructions that make the job
6
Note
easier and ensure safe operation.
6
6
2. General description
7
This booklet includes instructions for installation,
7
operation and maintenance of the Grundfos
7
AMD.05-08 mixer series for pumping station pits and
wastewater tanks. The mixers are designed for
8
applications involving the mixing, i.e. the
8
homogenization and suspension, of liquids of low to
8
medium viscosity, less than or equal to 500 mPas.
8
8
8
9
9
9
7
10
10
11
6
11
5
11
11
Fig. 1 AMD mixer
Pos. Description
1 Seal cover
2 Mounting bracket, 2" thread
3 Mounting clamp
4 Power supply cable
5 Nameplate
6 Motor
7 Propeller
1
2
3
4