Publicidad
Idiomas disponibles
Idiomas disponibles
position. Never change the angle of the guard to
any other position.
The end cover on the blade guard must never be
removed. Never attempt to operate the machine
without all of its blade guards in place.
FUNCTIONAL DESCRIPTION
This Straight Grinder is designed for grinding with an
abrasive wheel and may also be used for buffing and
polishing when fitted with the appropriate
accessories.
ELECTRICAL CONNECTION
The network voltage must conform to the voltage
indicated on the tool name plate. Under no
circumstances should the tool be used when the
power supply cable is damaged. A damaged cable
must be replaced immediately by an authorized
Customer Service Center. Do not try to repair the
damaged cable yourself. The use of damaged power
cables can lead to an electric shock.
EXTENSION CABLE
If an extension cable is required, it must have a
sufficient cross‐section so as to prevent an excessive
drop in voltage or overheating. An excessive drop in
voltage reduces the output and can lead to failure of
the motor. The following table shows you the
correct cable diameter as a function of the cable
length for this machine. Use only approved
extension cables. Never use two extension cables
together. Instead, use one long one.
Total Extension
Cord Size (AWG)
Cord Length (feet)
25
50
100
150
200
UNPACKING
Carefully remove the tool and all loose items from
the shipping container.
Retain all packing materials until after you have
inspected and satisfactorily operated the machine.
CARTON CONTENTS
1. Straight Grinder machine
2. Instruction manual
3. Face spanner wrench
DO NOT OPERATE THIS TOOL UNTIL YOU READ
AND UNDERSTAND THE ENTIRE INSTRUCTION
MANUAL
TO INSTALL A WHEEL
1.
Unplug the machine.
2.
Place the Inner Flange, the wheel and then the
Flange Nut on the arbor.
3.
Using Face Spanner Wrench, tighten the Flange
Nut.
4.
Removal is the opposite of assembly.
8
16
12
10
8
6
Publicidad
