Publicidad
Idiomas disponibles
Idiomas disponibles
Illuminated Beauty Mirror Features
• Illumi-Touch™ Control – Select from 3 light settings with
a gentle touch of the mirror base
• Variable Light Setting – Choose from day, office or
evening illumination
• Incandescent Light – Soft glare-free & shadow-free viewing
• 7x/1x Magnification – Two-sided mirror with normal and 7x mag-
nification
• Electrical outlet in base
• 8.5" Diameter
• Stable, non-slip base
• Fog free
• Mirror Measures 11"L x 7.5"W x 16.25"H
• Satin Nickel Finish
• Includes one replacement light bulb
Instructions for Use
1. Carefully remove all contents from the packaging and inspect
the product to make sure all components have
been received (Fig. 1).
2. Remove protective plastic coating from mirror face.
3. Place mirror on an even surface.
4. Adjust the mirror to either normal or magnified viewing. To do
so swivel the mirror to the viewing side of your preference while
firmly holding down the base.
5. Plug unit into a 120V household outlet.
6. Select the light setting of your preference with the Illumi-Touch
control feature. Touch the base of the mirror to activate:
•Touch once for evening (Low)
•Touch a second time for office (Medium)
•Touch a third time for day (High)
•Touch a fourth time to turn off
Note: The mirror casing may be hot after prolonged use.
Be cautious when adjusting the mirror face.
4
• To use the electrical outlet in the base, plug in the appliance of
your choice - when finished, unplug the appliance from the mirror
base. NOTE: Never leave a plugged in appliance unattended.
DO NOT exceed 10 amps on the electrical outlet.
To Replace Bulb:
Caution: Before replacing the bulb, always turn mirror off and allow
it to cool for at least 5 minutes.
• Remove the three screws on the side of the mirror with a Phillips
screwdriver (Fig. 1).
• Take off the mirror casing by gently pulling apart at the seam.
• Unscrew light bulb and replace with a new one. For your
convenience, one replacement bulb is included. Light bulb is
120v, 25 Watt, Type T.
• Replace the mirror casing and line up the screw holes. Screw
back into place.
Electrical
Outlet
Figure 1
Unscrew to
replace bulbs
Mirror
Casing
Replacement Bulb
5
Publicidad
