HoMedics Rapid+Relief HW-P100 Manual Del Usuario página 5

INDICATIONS FOR USE
BATTERY AND GEL PAD ASSEMBLY
1. Use a coin or small device
to turn the battery door to
the OPEN position.
5. Remove blue film
from the gel pads.
Arm & Leg Pain
2. Flip open battery cover
with a pin.
6. Place exposed side
onto the unit and press
firmly with fingertips to
adhere.
Place this device where you appear
to have pain. For optimum result,
move device to the other spot
indicated on the image on the left,
after finishing 20 minute cycle.
3. Insert battery provided
"+" side up
(CR2032
Lithium battery only).
7. Remove clear film from
the back of the gel,
pulling slowly to ensure
the gel stays in place.
5
4. Close and lock battery
cover.
8. Your unit is now ready to
place where it hurts.
Clean skin area before applying.
Note: