Sony BRAVIA XR-75Z9J Guía De Referencia página 7

*3 Google Assistant requires an Internet
connection.
*4 [Cable/Satellite box setup] setting is required.
*5 Accessibility shortcut is available by pressing
and holding MUTE.
*6 Power consumption will increase when the
built-in MIC is enabled as it is always listening.
For more information,
refer to the Help Guide.
Guidelines for IR Remote Control
• Point your remote control directly at the IR
sensor located on your TV.
• Make sure that no objects are blocking
the path between the remote control and
the IR sensor on your TV.
• Fluorescent lamps can interfere with your
remote control; try turning off the
fluorescent lamps.
• If you are having problems with the
remote control, reinsert or replace your
batteries and make sure that they are
correctly inserted.
Installing the TV to the Wall
This TV's instruction manual only provides
the steps to prepare the TV for Wall-Mount
installation before it is installed on the wall.
Your TV can be mounted to a wall using a
suitable Wall-Mount Bracket (not supplied).
If the Table-Top Stand is attached to the TV,
the TV may require detaching the Table-Top
Stand; see "Detaching the Table-Top Stand
from the TV".
Prepare the TV for the Wall-Mount Bracket
before making cable connections.
For product protection and safety
reasons, Sony strongly recommends that
installation of your TV on the wall be
performed by qualified professionals. Do
not attempt to install it yourself.
• Follow the instruction guide provided
with the Wall-Mount Bracket for your
model. Sufficient expertise is required in
installing this TV, especially to determine
the strength of the wall for withstanding
the TV's weight.
• The screws for installing the Wall-Mount
Bracket to the TV are not supplied.
• The length of the screw for Wall-Mount
Bracket differs depending on the
Wall-Mount Bracket thickness. Please
refer to below illustration.
10 mm – 12 mm
Screw (M6)
Wall-Mount Bracket
TV's rear cover
• Refer to the following table for
wall-mount hole pattern.
Wall-mount hole pattern
Model Name
XR-85Z9J
XR-75Z9J
×
400 × 400 mm
7
US
US