Publicidad
Idiomas disponibles
Idiomas disponibles
English
Turntable Operation
1. Turn the Power Knob clockwise to turn on the power.
2. Set the Speed Switch accordingly.
3. Place the record on the turntable. Use the 45 RPM Adapter if necessary.
4. Remove the stylus protector from the stylus assembly.
Note: To avoid stylus damage, make certain the included stylus guard is in place
whenever the turntable is being moved or cleaned.
5. Press the Start/Stop Button to start the turntable platter's rotation.
6. Release the tonearm Hold Down Clip.
Note: when the turntable is not in use, remember to lock back hold down clip.
7. Use the Cue Lever to lift up the tonearm.
8. Gently move the tonearm over the record where play is desired to begin. Set
the Cue Lever back to the down position, the tonearm will descend slowly
onto the record and begin to playback.
9. When the record is finished playing, use the Cue Lever again to raise the
tonearm and then return it to the Tonearm Rest. Release the lever to let the
tonearm sit back at its rest. To suspend the playback, repeat the same steps.
10. Lock the Hold Down Clip to secure the tonearm.
11. Press the Start/Stop Button again to stop the turntable platter's rotation. Turn
the Power Knob counter-clockwise to turn off the power.
Anti-skate Adjustment
A small outward "anti-skating" force can be applied to the tone arm to
compensate for the "skating" force that pulls the arm toward the center of the
record.
For best performance during normal turntable usage, it is recommended to
set the anti-skate control knob to the same value as indicated by the
downforce scale dial.
9
Publicidad
