Frequency range
Waterproof
Main parts (image A)
1
Power adapter
2
Microphone
3
Camera lens
4
Status indicator LED
Safety instructions
-
WARNING
• Ensure you have fully read and understood the instructions in this document
before you install or use the product. Keep this document for future reference.
• Only use the product as described in this document.
• Do not use the product if a part is damaged or defective. Replace a damaged
or defective product immediately.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualified technician for maintenance to
reduce the risk of electric shock.
• Unplug the product from the power source and other equipment if problems
occur.
• Do not expose the product to water or moisture.
• Do not unplug the product by pulling on the cable. Always grasp the plug and
pull.
• Consult the local laws and regulations for this product before installing and
using.
Preparing the security camera
4
Use an SD card with a minimum of 8 GB and a maximum of 128 GB.
1. Insert the new microSD card into the microSD card slot A
2. Plug the power adapter into a power outlet.
The product switches on automatically.
2412 - 2472 MHz
IP65
5
Wi-Fi antenna
6
Reset button
7
MicroSD card slot
8
Speaker
5
7
.