20
ASSEMBLING AND PREPARING
Mounting on a Table
1
Lift and tilt the TV into its upright position on
a table.
- Leave a 10 cm (4 inches) (minimum) space
from the wall for proper ventilation.
1 0 c m
2
Connect the power cord to a wall outlet.
CAUTION
•
Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
10 c m
(4 in c h e s )
1 0 c m
m
1 0 c
Securing the TV to a wall (optional)
(Depending upon model.)
1
Insert and tighten the eye-bolts, or TV
brackets and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2
Mount the wall brackets with the bolts to
the wall. Match the location of the wall
bracket and the eye-bolts on the rear of the
TV.
3
Connect the eye-bolts and wall brackets
tightly with a sturdy rope or cable. Make
sure to keep the rope parallel to the flat
surface.
CAUTION
•
Make sure that children do not climb on or
hang on the TV.
NOTE
•
Use a platform or cabinet that is strong and
large enough to support the TV securely.
•
Brackets, bolts, and ropes are optional. You
can obtain additional accessories from your
local dealer.