Changing The Master Code; G- Technical Features - SCS Sentinel CodeAccess RFID AAA0037 Instrucciones De Uso

Door settings
To set door relay strike time

Changing the master code

Changing the master code
For security reasons we recommand changing the master code from default.

G- TECHNICAL FEATURES

> Voltage DC 12V +/-10%
> Badge reading distance 3-6 cm
> Active current < 60mA
> Stand-by current 25±5mA
> Lock load output 3A max
> Operating temperature -45°C ~ 60°C
> Degree of humidity : 10% - 90% RH
> Relay output delay time
> Possible wiring connections : electric lock, gate automation, exit button
> Backlight keys
> 2000 users, supports badge, PIN, badge + PIN
> Full programming from the keypad
> Can be used as a stand alone keypad
> The keyboard can be used to remove the lost badge number, thoroughly eliminate
the hidden safety trouble
> Adjustable Door Output time, Alarm time, Door Open time
> Fast operating speed
> Lock output current short circuit protection
> Indicator light and buzzer
> Frequency : 125kHz
> Maximum transmitted power : 2,82mW
> Protection rating : IP68
RELAY OUTPUT DELAY TIME
* Master code # 4 0~99 # * 0-99 is
to set the door relay time 0-99 seconds
0 New code #
New code #
The master code consists of 6 to 8 digits
en
17