Descargar Imprimir esta página

UFESA IT-122 Manual De Instrucciones página 12

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH
INSTRUCTIONS FOR USE
Before using the product for the first time, make sure that there is no appa -
rent damage to any of the parts. If the device is damaged, please contact our
aftersales service or one of the authorized distributors.
Remove the product from its original packaging taking special care not to
damage any of its parts. Do not use excessive force to remove the product
from the box.
Before taking any measurements, the thermometer should be in place where
the measurement is to be taken for at least 30 minutes. This prevents tem -
This product performs temperature measurement in direct mode.
Regular body temperature values:
The IT-122-contactless
types of objects such as the body temperature of a person. Body tem -
perature varies in each individual due to various factors such as sex, age, skin
type, time of da y, regular level of physical activity or diet.
Take a reading:
Follow the instructions that are presented below in order to take a reading:
1. Place on the surface of whatever you wish to know the temperature and take
a reading by pulling the trigger of the gun (1). If it is a body temperature
it is recommended to take the temperature by directly applying it to the
forehead from a distance of between 5 and 8cm. Make sure that there are
no elements that can influence the incorrect reading of the temperature
(sweat, hai r, make-up, piercings or other objects).
2. Read the value of the reading given by the thermometer. Make sure that
the reading mode indicated is correct (3). If the temperature of an body
has been taken Body temp, should appear and if on the contrary an object
temperature has been taken Body temp. should not appear. In the case that
the correct mode is not indicated,
Mode key (8) and the reading taken again.
Repeat the reading if you do not trust the validity of the reading values. In the
event that you believe that the results are not correct, take the appliance to
a Technical Support Service. This product cannot be calibrated by the user.
The product will automatically turn
the keys.
12
thermometer allows the taking of temperature of di-
it should be changed by pressing the
after a few seconds without pressing

Publicidad

loading