Do not use the switch "Lock-ON" feature in situations where drill bit binding is likely. (For exam-
ple: just before the bit is ready to break through the material, anytime when using a "Hole Saw",
auger bits........ etc.) When the bit binds, the drill's body will twist or kick-back in opposite direc-
tion and the release of the trigger "Lock-ON" may be di cult.
Be aware of the location and setting of the switch "Lock-ON" button. If the switchis locked "ON"
during the use, be ready for emergency situations to switch it "OFF", by rst pulling the trigger
then immediately releasing it without pressing the "Lock-ON" button.
When installing a drill bit, insert the shank of the bit well within the jaws of the chuck. If the bit
is not inserted deep enough, the grip of the jaws over the bit is reduced and the loss of control
is increased.
Do not use dull or damaged bits and accessories. Dull or damaged bits have a greater tenden-
cy to bind in the workpiece.
When removing the bit from the tool avoid contact with skin and use proper protective gloves
when grasping the bit or accessory. Accessories may be hot after prolonged use.
Check to see that keys and adjusting wrenches are removed from the drill before switching the
tool "ON". Keys or wrenches can y away at high velocity striking you or a bystander.
Do not run the drill while carrying it at your side. A spinning drill bit could become entangled
with clothing and injury may result.
! WARNING ¡
Some dust created by power sanding, sawing, grinding, drilling, and other construction activi-
ties contains chemicals known to cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
Lead from lead-based paints,
Crystalline silica from bricks and cement and other masonry products, and
Arsenic and chromium from chemically-treated lumber. our risk from these exposures varies,e-
pending on how often you do this type of work. To reduce your exposure to these chemicals:
work in a well ventilated area,and work with approved safety equipment,such as those dust
masks that are specially
designed to lter out microscopic particles.
www.siefkentools.com
Built to Exceed
3
YEARS
L I M I T E D WA R R A N T Y
6