Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
User Manual //
Easy Home TwinTuner HD
3. Installation
When you enter the "Installation" menu, press [Up/Down] key to select menu
pages among Auto scan, Channel scan, Aerial adjustment, LCN. The default Pass-
word is "0000".
3.1 Auto Scan
When you enter to "Auto Scan" menu.
1. In "FTA only" item, press [Left/Right] key to turn yes/no.
2. Moving the highlight to "Search" item and press [OK] key to start scanning.
3. In the "Auto Scan" menu, press [Exit] key to draw back from the scanning.
3.2 Channel Scan
When entering to "Channel Scan" menu.
1. There are two choices of "Scan Mode," by channel or by frequency.
2. There are two choices of "Scan Band," "UHF" or "VHF."
3. There are 58 choices of "CH No" ranging from In frequency "CH05(177500Hz)
" to "CH70(866000Hz)."
4. You can adjust any frequency to search by moving highlight to "frequency"
and pressing [left/right] key.
5. There are three choices of "Bandwidth", 6, 7, and 8 MHz.
6. When you complete your modification, move highlight to "Search" item and
press [OK] key, then it will begin
to scan.
7. Press [Exit] key to exit the scanning.
3.3 Aerial adjustment
When entering to "Aerial Adjustment" menu, the user can check and adjust the
Signal Intensity and Signal Quality of every Ch No and turn on the power for ac-
tive antennas.
3.4 LCN
You can activate or deactivate LCN mode. The function should be deactivated for
you to be able to change the order of the channels.
2
Publicidad
