Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning & Maintenance
Make sure that the appliance is disconnected from the electrical power supply
before starting any cleaning or maintenance work.
For Lighting:
In the event of a lighting failure, please contact a service center for replacement and/or repair by
authorized and qualified personnel with identical lighting
Routine Maintenance:
•
The appliance shall be disconnected from its power source during cleaning or maintenance
and when replacing parts.
•
Clean the enclosure and interior of the appliance regularly.
•
Wash the unit with moist cloth. Never let the switch, cable or plug of the lighting get wet.
•
DO NOT use abrasive cleaners. Use only mild soap and water.
•
Clean the door seal with water only.
•
Ensure that no cleaning water penetrates the electrical components.
•
DO NOT use jet/pressure water to clean the appliance.
•
DO NOT allow water for cleaning to run through the inner drain hole into the water container.
•
DO NOT allow oil or fat to come into contact with the plastic components or door seal. Clean
them immediately if contact occurs.
•
Take care when cleaning the rear of the appliance.
•
Please ask for an agent or qualified technician to carry out repairs if required.
If the appliance is to be left inactive for long periods, unplug the appliance, empty the shelves and
clean thoroughly.
Wiring Diagram
17
Publicidad
