HAEGER Vapour Pro 2700 Instrucciones De Uso página 6

English
How to use the iron
 The pilot lamp will stay lit while the iron is heating up and go out as soon as it has reached the selected temperature. Once the
iron is hot, you can start ironing even while it continues to heat itself.
 Sort your garments out based on their cleaning symbol labels, always starting with clo thes that have to be ironed at low
temperatures. Please note that
Filling the water tank
 Set the steam regulator to the "0" position and unplug the iron from the wall socket.
 Only use clean tap water, without any type of additive. Any other type of liquid could damage the appliance.
 The water level should not exceed the "Max" line marked.
 To obtain better and longer steam production mix tap water with distilled water in the measures shown in the table below:
 Your water supply company can provide you with the hardness levels for your area. Do not fill beyond the maximum water
level.
4
on the label means that this article may not ironed.
• Synthetic fibres
•• Silk- Wool
••• Cotton, Linen
Water hardness
Very soft / soft
Average
Hard
Very hard
Low temperature
Medium temperature
High temperature
Amount of distilled
water per tap water
0
0
Approx 1
Approx 2
Instructions for use