Oster 5770 Manual De Instrucciones página 4

FOR U.K. AND IRELAND ONLY
If the plug is not suitable for the socket outlets in your home, it can be removed and
replaced by a plug of the correct type. Please refer to "Installation of a plug" below.
Installation of a plug Applicable to U.K. and Ireland.
This product is fitted with a 5A plug complying to BS1363. If this plug is unsuitable or
needs to be replaced, please note the following:
NOTE: If the terminals in the plug are not marked or if you are unsure or in doubt about
the installation of the plug please contact a qualified electrician.
If a 5A 3-pin plug is fitted, it must be an ASTA approved plug, conforming to BS1363
standard.
Replacement 5A fuses must be BSI or ASTA BS1362 approved.
The wires in the mains lead are coloured as such:
BROWN - LIVE
BLUE - NEUTRAL
Please note that the colour of these mains wires may not correspond with the colour
markings that identify the terminals in your plug.
Please proceed as follows:
The BROWN coloured wire must be connected to the terminal, which is marked with
the letter "L" or is coloured RED.
The BLUE coloured wire must be connected to the terminal, which is marked with the
letter "N" or is coloured BLACK.
DO NOT CONNECT either of these wires to the earth terminal in the plug. The earth
terminal plug is marked with the letter "E", or with the earth symbol , or coloured
green, or green and yellow.
3