Publicidad
Idiomas disponibles
Idiomas disponibles
Plug the freezer into dedicated, properly inst
alled-grounded wall outlet. Do not, under any
circumstances, cut or remove the third (ground) prong from the power cord. Any questions
concerning power and/or grounding should be directed toward a certified electrician or an
authorized service center. This unit is not designed to be installed in an RV or used with an
inverter.
After plugging the appliance into a wall outlet, turn the unit on and allow the unit to cool for 2~3
hours before placing food in the freezer compartment.
Install door external handle
Step 1
Pick out the screws
on the freezer cabinet and door by tools, total 5 pieces and pick out the handle
base handle cover
, and handle decorated cover
.
Step 2
Fix the handle base
on the door by driving 5 pieces of screws picked.
Step 3
Fix the handle cover
in the way of handle orbit.
Step 4
After handle cover assembled on the door, fasten the handle decorated cover
on the handle
cover. Please refer to the attached photo.
Publicidad
