Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
Information codes
The washer may display information codes to help you understand what is occurring with
your washer better.
No
Code
1
2
3
4
52 English
WA3200T_DC68-03850D-00_EN.indd 52
The WaterLevel sensor is not working properly.
•
Check WaterLevel Sensor wire harness.
If the information code remains, contact a customer service
•
centre.
1C
NOTE
When the washer displays "1C", the washer do draining for
3 minutes. During this time, the POWER button is inoperative.
Check the motor for operation.
3C
•
Try restarting the cycle.
•
If the problem continues, call for service.
Water is not supplied.
•
Make sure the water taps are open.
•
Make sure the water hoses are not clogged.
•
Make sure the water taps are not frozen.
•
Make sure the washing machine is operating with sufficient
water pressure.
4C
•
Make sure that the cold water tap and the hot water tap are
properly connected.
•
Clean the mesh filter as it may be clogged.
NOTE
When the washer displays "4C", the washer do draining for
3 minutes. During this time, the POWER button is inoperative.
•
Make sure the cold water supply hose is firmly connected to
the cold water tap.
4C2
If it is connected to the hot water tap, the laundry may be
deformed with some cycles.
Meaning
5/13/2020 2:40:28 PM
Publicidad
