Urmet 1168 Manual De Uso página 14

3.3 CALLING USING A PHYSICAL OR LOGICAL CODE
3.3.1
The display lights up when any button on the calling module is pressed or after
the user approaches the calling station as indicated by the presence sensor
(optional).
The Home Page is shown as in the figure on the right if there are user numbers in
the phonebook.
If the phonebook is empty, the Home Page will show the indication "Type the
code".
3.3.2
Enter the calling code associated with the user you want to call.
The button at the
delete errors. If no characters are present this button will go back to the Home
Page.
Press the shortcut menu
3.3.3
During the call, call in progress confirmation is shown by the side with a voice
message: "CALLING".
Furthermore, the LED corresponding to the symbol
of the module) will light up green on the audio or audio-video door unit.
To interrupt the call, press the button next to the icon
A hearing aid module (ILA) Ref.1168/48 is needed to hear the voice message.
3.3.4
When the apartment station replies, conversation mode starts and the screen
shown on right appears on the display.
Furthermore, the LED corresponding to the symbol
of the module) will light up orange on the audio or audio-video door unit.
3.3.5
When the door is opened from the apartment unit, the message shown by the side
will appear with a voice message: "DOOR OPEN".
Furthermore, the LED corresponding to the symbol
of the module) will light up green on the audio or audio-video door unit.
A hearing aid module (ILA) Ref.1168/48 is needed to hear the voice message.
14
icon or "X" button on the keypad module can be used to
to all the viewed user.
(present on the front panel
.
(present on the front panel
(present on the front panel
DS1168-014B